For neutral liquids and gases such
as water, oil and compressed air
0.2/0.3-16 Bar pressure range
Water hammer damped
WRAS approval on EPDM versions
Options: FKM seal versions
NPT end connections
Technical data
Differential pressure range:
0.2-16 bar/ 0.3-16 bar
Ambient temperature: Max.
50
Media temperature: NBR: -10
- +90
℃
/ EPDM: -30 - +100
℃ (with AR coil (EEx m ll T4) generally max.
+50
℃
)
Materials: Valve body:
Brass
Diaphragm: NBR or EPDM
Valve plate: NBR or EPDM
End Connection
Kv Valve (
m3/h)
Orifice
(mm)
Seal* Materials
Type designation
Code No.
Without coil
Differential
pressure (bar)
Min.
Max. AB/AK
AM
G 1/4”
1/2"
6.0
EPDM NBR
EV220A 6B
EV220A 6B
042U4001
042U4003
0.2
0.2
10
16
G 3/8”
G 3/4"
6.0
EPDM NBR
EV220A 6B
EV220A 6B
042U4002
042U4004
0.2
0.2
10
16
3/8”
1"
10
EPDM NBR
EV220A 6B
EV220A 6B
042U4011
042U4013
0.2
0.2
10
16
G 1/2”
1/2"
10
EPDM NBR
EV220A 6B
EV220A 6B
042U4012
042U4014
0.2
0.2
10
16
G 1/2”
3/4"
12
EPDM NBR
EV220A 6B
EV220A 6B
042U4021
042U4023
0.3
0.3
10
16
G 1/2”
1"
14
EPDM NBR
EV220A 6B
EV220A 6B
042U4022
042U4024
0.3
0.3
10
16
G 3/4”
1/2"
18
EPDM NBR
EV220A 6B
EV220A 6B
042U4031
042U4032
0.3
0.3
10
16
G 1”
3/4"
22
EPDM NBR
EV220A 6B
EV220A 6B
042U4041
042U4042
0.3
0.3
10
16
Taiwan made solenoid valve
We are proud to offer
a complete line of solenoid valves, manifold assemblies, and custom valve assemblies.
You’ll find the same engineered quality and applications expertise in our
level and flow controls as you have in our valves. Solenoid valves are the engineer’s
choice for critical applications, from the complexity of medical diagnostic equipment
to the harshest environmental conditions. In most applications, it will see millions
of cycles before retrofit or replacement is required.
We can engineer controls
for your valve requirements. Our solenoid valves and manifolds are constructed from
standard, modular components. We can manufacture a nearly unlimited number of differently
configured controls to meet your needs. Our design flexibility applies not only
to the standard units described in this catalog, but also to a wide variety of “specials”...
including one for your application. We can design a control product with your choice
of material, electrical connection, mounting, porting, or any variety of options.
End Connection
Orifice
(mm)
Flow rate ref.
Type
Maximum differential pressure
Max. working pressure
(kgf/cm2)
Maximum system pressure
CV valve
diameter
(mm2 )
Water
Air
Oil
AC
DC
AC
DC
AC
DC
3/8”
15
4.5
80
V2F1-03-15
0
10
7
10
7
7
7
20
1/2”
15
5.5
100
V2F1-04-15
0
10
7
10
7
7
7
20
3/4”
17
7
125
V2F1-05-17
0
9
6
9
6
6
6
20
3/4”
20
9.5
170
V2F1-06-20
0
10
7
10
7
7
7
20
1”
23
11
198
V2F1-07-23
0
9
6
9
6
6
6
20
1”
27
14
250
V2F1-10-27
0
10
7
10
7
7
7
20
1, 1/4”
40
29.5
530
V2F1-12-40
0
10
7
10
7
7
7
20
1, 1/2”
40
31
560
V2F1-15-40
0
10
7
10
7
7
7
20
2”
43
36
648
V2F1-18-43
0
10
7
10
7
7
7
20
2”
52
52.5
945
V2F1-20-52
0
10
7
10
7
7
7
20
2, 1/2”
80
98
1760
V2F1-25-80
0
10
7
10
7
7
7
20
3”
80
105
1890
V2F1-30-80
0
10
7
10
7
7
7
20
Features
The OM Series is
quarter-turn actuators that produce up to 4500Nm of torque. The actuator can be
applied for service on the most of ball valves, butterfly valves, plug valves and
other similar rotary quarter-turn automation applications. They provide self-locking
as standard units, local visual indicators and manual override options together
with a wide range of voltages.
Enclosure
IP 67: Waterproof and dust-proof enclosures.
NEMA 4X: Waterproof and dust-proof enclosures. Material : Aluminum alloy,
powder coated.
Manual Override
Cluthless design, the manual operation
can be operated without any lever, clutch or brake upon power outage. When
electric motor is operating, manual hand-wheel won't rotate for person safe purpose.
Motor
Standard extended duty cycle induction
motor.
Finsulation class for all models.(OM-A, OM-A-M, BM-2, and OM-1 to OM- 13.)
Built-in thermal protection (135°C) prevents motor burning out.
Gear Train
High alloy steel gear trains provide
self-locking function to avoid valve back drive.
Position
Indicator
All models are equipped with a direct-drive
position indicator on the top of actuator cover.
Ambient Temperature
Range
Temperature : -30°C ~ +65°C
Humidity : 30% ~ 95%
The Gear Train has been factory lubricated
for the life under normal operating conditions.
Specification
Quarter-turn Electric Actuator
Model No.
Valve Type
Valve Size(inch)
Valve Material
OM-1
Screwed Ends Ball
Valve
1/2”~1-1/2”
SUS316/Bronze/PVC/PP
OM-A
Screwed Ends Ball
Valve
2”
SUS316/Bronze/PVC/PP
OM-2
Screwed Ends Ball
Valve
1-1/4”~2”
SUS316/Bronze/PVC/PP
OM-1
Socket Welded Ends
Ball Valve
1/2”~1-1/2”
PVC/PP
OM-A
Socket Welded Ends
Ball Valve
2”
PVC/PP
OM-2
Socket Welded Ends
Ball Valve
1-1/4”~2”
PVC/PP
OM-3
Socket Welded Ends
Ball Valve
2-1/4”~3”
PVC/PP
OM-1
Flanged Ends Ball
Valve
1/2”~1”
Cast Iron/SUS304/SUS316
OM-A
Flanged Ends Ball
Valve
1-1/4”~2”
Cast Iron/SUS304/SUS316
BM-2
Flanged Ends Ball
Valve
1-1/4”~3”
Cast Iron/SUS304/SUS316
OM-2
Flanged Ends Ball
Valve
1-1/4”~2”
Cast Iron/SUS304/SUS316
OM-3
Flanged Ends Ball
Valve
2-1/4”~3”
Cast Iron/SUS304/SUS316
OM-1
3-Way Screwed Ends
Ball Valve
1/2”~1-1/2”
Bronze / SUS316
BM-2
3-Way Screwed Ends
Ball Valve
2”
Bronze / SUS316
OM-2
3-Way Screwed Ends
Ball Valve
1-1/2”
Bronze / SUS316
OM-3
3-Way Screwed Ends
Ball Valve
2”
Cast Iron/SUS304/SUS316
OM-1
3-Way Flanged Ends
Ball Valve
1”
Cast Iron/SUS304/SUS316
BM-2
3-Way Flanged Ends
Ball Valve
1-1/2”~2”
Cast Iron/SUS304/SUS316
OM-2
3-Way Flanged Ends
Ball Valve
1-1/2”
Cast Iron/SUS304/SUS316
OM-3
3-Way Flanged Ends
Ball Valve
2”
Cast Iron/SUS304/SUS316
Note: 1. Please check valve torgue before mounting
2. Please check working
pressure, service fluid, and temperature.
Model No.
Power
(Watts)
Max Torgue
(Nm)
Speed
(Sec/90°)
Weight
(kg)
Manual
Override
Mounting Flange
(ISO 5211)
BM-2
40W
120
8
6
N/A
F07
OM-A
10W
50
20
3
N/A
F05 or F07
OM-A-M
10W
50
20
3
Lever
F05/F07
OM-1
10W
35
12
2
Lever
F03/F05
OM-2
40W
90
15
11
Hand-wheel
F07
OM-3
40W
150
22
20
Hand-wheel
F10
OM-4
120W
400
16
20
Hand-wheel
F10
Ball valve
Features
The ball valve Series is an economical, stainless steel, ball
valve ideal for chemical, pharmaceutical, and food and beverage applications. Three
piece constructions allows for in line maintenance and cleaning. Valve body and
end caps are investment cast for exceptional quality and corrosion resistance. Reinforced
TFE seats and body seals are glass reinforced for strength while providing excellent
chemical compatibility and bubble tight sealing to 1000 psi. Standard mounting pad
allows for easy automation.
Needle valve
Features
These valves are a non-rotating rising
stem design, working pressures to 15,000 psi (1034 bar). Tubing sizes range from
1/8" to 1/2". Tubing connections utilizes single ferrule design. Operating temperatures
from 0°F to 650°F (-17.8°C to 343°C). 316 stainless steel construction, other options
available.
Butterfly
valve
Features
These valves are a non-rotating rising
stem design, working pressures to 15,000 psi (1034 bar). Tubing sizes range from
1/8" to 1/2". Tubing connections utilizes Autoclave's SpeedBite single ferrule design.
Operating temperatures from 0°F to 650°F (-17.8°C to 343°C). 316 stainless steel
construction, other options available.
Diaphragm Valve
(Flanged)
Description
Diaphragm valves offer many body and elastomeric
diaphragm material combinations. The valve design is abrasion-resistant and non-clogging.
When the diaphragm, which is connected to the stem of the valve by a compressor,
is pulled away from the bottom of the valve body or weir, the path of the fluid
has a smooth, streamlined flow. Slurries at low pressure, which would normally clog
most other valve designs, easily pass through a diaphragm valve. The valve has a
top-entry design, allowing in-line maintenance; it is suitable for throttling and
on/off service in applications ranging from water treatment to chemical abrasion
processes. Diaphragm valves are operated manually, electrically or pneumatically.
Features and Benefits
Flanged (ANSI) face-to-face dimensions are equivalent to most
commonly used metallic valves
Rugged body and bonnet are of solid thermoplastic for maximum
corrosion resistance
Uniquely designed body and bonnet together with diaphragms of new sealing
designs by computer
dynamic analysis for superior sealing
Weir design for excellent throttling
Bubble-tight sealing, even in applications such as slurries
or suspended particles
Bonnet seals to protect internals from corrosive environments
Built-in travel stop to prevent over-tightening or compressive
strain on diaphragm
Integrally molded bottom stand for simple yet firm panel mounting
Indicator at the top for indication of valve position and prevention
of over-tightening
PVDF gas barrier, which protects EPDM backing from gas permeation,
is standard for PVDF valves
Low profile
1/2" - 2" in bayonet structure to connect compressor and diaphragm
- easy diaphragm replacement.
ALPHA POMPE SPA presents the new line of pneumatic rack & pinion Stainless Steel
actuators, particularly engineered for corrosive environments or Sanitary.
Body made of special high quality forged Stainless Steel: A182 - F 316 - EN 10088/3
- 1.4401.
General
Field of Applications:
Food Industry.
Pharmaceutical.
Sanitary.
Cosmetics.
Enology.
Marine and Offshore Plants.
Corrosive environments.
Availability
in Double Acting (DA) and Spring Return (SR) version:
Full accordance from ISO 5211 e DIN 3337 standards
of easy valves coupling.
Full accordance from NAMUR standards of easy solenoid coupling.
Full accordance from NAMUR standards of easy ancillary coupling.
High performance Stainless Steel pistons (Feed water pressure up to 15 BAR - 225
PSI).
Double adjustable rotation screw on both covers and pistons, to avoid continuous
heavy stresses from teeth, shaft, and body.
Compact building, extended life-span.
Pre-loaded coated springs cartridges for easy and versatile using: maximum safety
and corrosion resistance.
Simply shape to avoid holes and cavity, for easy cleaning.
Standard
Version:
Extruded/machined
surface, for normal industrial applications.
Anodized Aluminum pistons (Max. pressure feeding 8 BAR - 120 PSI). Standard
working temperature: -20 +80°C (-4 + 176°F).
Options:
Mirror-polished
surface, specially indicated for Food, Sanitary and Pharmaceutical industry.
